Beta 10P/20P/30P/40P The digital panel meter Beta P Series have been designed for industrial applications, which frequently require precise and on site adjustment of the display range, with true RMS measurement the 4 digit fully programmable Digital Panel Meter, measures AC Current / Voltage in a single / three phase network, available in 48×96 / 96×96 size. Universal features like I/P: V-100 to 500VLL programmable, I-1/5A selectable, Aux: 40 to 300V AC/DC, click fit arrangement.
Features :
- True RMS measurement
- On site programmable PT/CT ratios
- User selectable CT Secondary 5A/1A
- User selectable PT Secondary
- User selectable CT Primary
- User selectable PT Primary
- User selectable 3 phase 3Wire or 4Wire or Single phase Network
- Higher Security
- EMC Compatibility
Beta 50, 60, 70 is a digital panel meter used for the measurement & electrical parameters like volt, millivolt & current. It is mainly used in laboratories.
Features
• DC Current ranges and DC Voltage ranges
• 4 ½ Digit ultra bright Display
• Highly adaptable DPMs suitable for a wide range of measuring applications
• Versions available for DC Current (mA) and DC voltage (mV & Volts) inputs
Beta 90A, B is the digital panel meter designed for industrial applications, which frequently require precise, onsite adjustment of the display range.
Features
• Available in size 48 x 24 mm
• Compact digital display units in a 48 mm x 24 mm DIN standard snap-in housing.
• The low power consumption and small overall size of these DPMs suits high-density panel applications.
Beta 90T is the digital panel meter which have been specially designed for the temperature measurement.
Features
• Pt 100 temperature version
• Scaling adjustable over a wide range
• Versions available for current or voltage inputs (DC and AC), or Pt 100 temperature sensors
Beta 90 is the digital panel meter designed for industrial applications, which frequently require precise, on-site adjustment of the display range.
Features
• Factory pre-set with many measuring ranges
• Measuring ranges selectable using jumpers
• Zero point and final value adjustable (inc. 4… 20 mA)
• 230 V AC power supply option
• Overall depth only 72 mm
Beta G1 is the digital panel meter designed for industrial applications, which frequently requires precise and on-site adjustment of the display range.
Features
• 3/64 DIN Indicator
• LCD: 3-1/2 digit 0.5” high LCD display (non backlit or -ve image red) bright red backlighting
• Limited range display scaling
• Span adjustment and offset adjustment through potentiometer
Beta G2 is the digital panel meter specially designed for the industrial applications, which frequently requires precise and on-site adjustment of the display range.
Features
• 3/64 DIN Indicator
• LCD: 4-1/2 digit 0.5” high LCD display with optional negative image, bright red backlighting
• Limited range display scaling
• Span adjustment and offset adjustment through potentiometer
Beta Hz is a digital panel meter which has been specially designed for frequency measurement in industrial applications.
Features
• Display range : 0…+1999
• Simple configuration
• Available with 24V DC and 110 VAC
• (50 / 60Hz) Supply Voltage
N30 (P, O, U, H) is a digital panel meter.
Features
• Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos, frequency, active, reactive and apparent energy, 15 minutes active power, 10 minutes voltage, 10 seconds frequency
• Three-colour display (14mm high), in three intervals of the measured value
• Meter programming from the keyboard or through the RS-485 interface by means of the free delivered LP config program
• Four alarm outputs with signalling by LED diodes, operating in 6 different modes
• Storage of minimal and maximal values for all measured quantities
• Conversion of any measured value into a 0/4…20mA or 0…10V analogue signal
• Storage of minimal and maximal values for all measured quantities
• Firmware updating (option)
NA3 digital meter with bargraph.
Features
• Universal input for the measurement of d.c. current, d.c. voltage and temperature
• 3 or 7-colour bargraph
• Programming of bargraph colour depending on the measured quantity value
• Signalling of set alarm value over flow
• Storage of measured signal in programmed time segments (750 samples)
• Current or voltage analog output
• Communication in SCADA systems (RS485/Modbus interface RTU and ASCII)
NA5 digital meter with bargraph.
Features
• 3 or 7- colour bargraph with programmable colour switching over
• Recording of 750 measuring segments , released temporary
• Universal input
• Programmable indication characteristic and bargraph magnifier
• Up to 8 programmable alarm outputs
• Communication in SCADA s ystems (RS485/Modbus interface)
• Conversion of measured quantity into an analog standard signal for automation systems
NA6 digital meter with bargraph.
Features
• 2 independend measuring channels with an universal input
• 3 or 7-colour bargraph with programmable colour switching over
• Recording of 750 measuring segments, released temporary
• Programmable indication characteristic and bargraph magnifier
• Up to 8 programmable alarm outputs
• Mathematical operations on channels
• Communication in SCADA systems (RS485/Modbus interface)
• Conversion of measured quantity into an analog standard signal for automation systems
The N27P is designed for direct or indirect measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg fi, fi, Ep, Eq. N27P fulfills the requirements for devices mounted in standard modular switchers.
The N20 meter is a digital programmable panel instrument destined for measurements of d.c. voltages, d.c. currents or temperature. The readout display is a LED display which enables the exposition of results in red, green or orange colour.
Features
- 2 alarm outputs of OC type (4 types of alarms) signaled by highlight of the alarm index,
- protection level ensured by the housing: IP65,
- readout field: 5 three-colour LED displays of 14 mm height,
- highlighted measuring units,
- supply: 85…253 V a.c./d.c. or 20…40 V a.c./d.c.
- overall dimensions: 96 x 48 x 64 mm.
- For the configuration of the N20 is destined LPConfig program. The meter must be connected with the PC computer through a PD14 converter.
- Parameters which can be reprogrammed are as follows:
- display colour, individually in three intervals,
- thresholds of displayed overflows,
- display precision of the result (decimal point),
- highlight of the unit,
- kind of the measured signal a.c. or a.c. + d.c. (True RMS),
- averaging time of the measurement,
- recounting of indications (individual characteristic),
- two alarms of OC type operating in six working modes.
N21 is an ideal soluttion for visualisation of industrial processes. Universal input, universal supply and modern OLED display allow to apply meter in many applications.
Features
- Universal measuring input (for standard signals and cooperation with temperature sensors).
- Relay alarm output.
- Universal supply voltage from 24 V up to 230 V a.c./d.c.
- Supply of object transducers 24 V d.c.
- OLED display.
- Meter configuration through miniUSB connector with free eCon software.
- Programmable parameters in eCon software:
- selection of measured value,
- rescaling of indications (individual characteristic),
- accuracy of measured value (decimal point),
- alarm output mode,
- measurement averaging time,
- defining your own unit,
- language selection.
- Protection grade: IP65
- External dimensions: 48 x 96 x 64mm.
The N20Z meter is a digital programmable panel instrument destined for measurements of a.c. voltages, a.c. currents, or frequency. The readout display is a LED display which enables the exposition of results in red, green or orange colour.
Features
- input:
– a.c. current: 1 A, 5 A,
– a.c. voltage: 100 V, 250 V, 400 V
– frequency: 20…500 Hz. - 2 alarm outputs of OC type (4 types of alarms) signaled by highlight of the alarm index,
- protection level ensured by the housing: IP65,
- readout field: 5 three-colour LED displays of 14 mm height,
- highlighted measuring units,
- supply: 85…253 V a.c./d.c. or 20…40 V a.c./d.c.
- overall dimensions: 96 x 48 x 64 mm.
For the configuration of the N20Z is destined LPConfigprogram. The meter must be connected with the PC computer through a PD14 converter.
Parameters which can be reprogrammed are as follows:- display colour, individually in three intervals,
- thresholds of displayed overflows,
- display precision of the result (decimal point),
- highlight of the unit,
- kind of the measured signal a.c. or a.c. + d.c. (True RMS),
- averaging time of the measurement,
- recounting of indications (individual characteristic),
- two alarms of OC type operating in six working modes.
Features
- 4-digit LED display, digits of 20 mm high,
- Possible configuration of parameters through the PD14programmer and the free delivered LPConfig program,
- Precision of displayed results (decimal point),
- Measurement averaging time,
- Recounting of indications (individual characteristic),
- Automatic or manual compensation: temperature of cold junction for measurements with thermocouples or wire resistance for Pt100 sensors (N24T),
- Supply: 85…253 V a.c./d.c. or 20…24 V a.c./d.c., 110 V a.c., 230 V a.c.
- Casing protection grade: IP65
- Overall dimensions: 96 x 48 x 64 mm
- See also the new configurable indicator of the N25 series with a 5-digit display.
